MORE POWER. MORE CONFIDENCE. MORE FUN ON EVERY TRAIL. THE NEW STANCE E+ ELEVATES YOUR RIDE WITH A REFINED SUSPENSION SETUP, UPDATED GEOMETRY, AND A SERIOUS BOOST IN POWER AND TORQUE. THE RESULT IS A MORE CAPABLE, ULTRA-DYNAMIC E-MTB THAT CHARGES UP CLIMBS, STAYS COMPOSED ON TRICKY DESCENTS, AND GIVES YOU TOTAL CONTROL FOR ANY TERRAIN.
KEY PERFORMANCE FACTORS
DYNAMIC POWER
The new SyncDrive Pro 3X motor transforms the Stance E+ (0 & 1) with a massive boost in performance. Building on the lightweight 2.6kg design of the Pro 3 motor, it delivers up to 800W of peak power with 100Nm of torque. This results in an 11% improvement in torque-to-weight ratio, providing stronger climbing performance and better control in technical terrain. It’s engineered to maintain powerful assist levels at a wide range of cadences, giving you sustained support over longer periods. Beyond the motor, rear suspension is engineered with enhanced anti-squat to minimise energy loss and improve pedalling efficiency.
TOTAL TRAIL CONFIDENCE
New FlexPoint suspension delivers 140mm of active rear travel paired with a 150mm fork for smoother, more capable handling than the previous generation’s 125/140mm setup. Updated geometry further elevates performance. A steeper 76.5-degree seat tube angle puts you in a stronger, more efficient climbing position, while a slacker 64.5-degree head tube angle and increased bottom bracket drop lower the center of gravity for greater stability and control. The result is total confidence when the trail gets fast, steep, and technical.
PERSONALIZED RIDE
From controller setup to fine-tuning motor performance, the new Giant E+ System makes it easy to customize your ride. Support modes are clearly color-coded, and the RideControl Dash 2 lets you decide exactly which data you want to see. You can run a lighter weight 625Wh battery or the longer lasting EnergyPak Smart 800 (which comes on the Stance E+ 0 and Stance E+1), and you also have the option to add an EnergyPak Plus 250Wh or 200Wh range extender for epic days out. Using the RideControl App, you can adjust power outputs and optimize your balance of torque, efficiency and range—so you’re always ready to take on whatever the trail calls for.
RANGE
How far can I expect to ride on a single battery charge?
The range for a single battery charge can vary greatly depending on conditions such as the combined weight of the rider and cargo; wind resistance; tyre pressure and tread profile; terrain and elevation changes; road or trail surface; outdoor temperature; maintenance of the E-Bike; and the condition of the battery.
The bar below gives an approximate range. Conditions are categorized as extreme, good and ideal. Extreme conditions typically occur when riding with a heavy load, strong headwinds or excessive climbs.
ENERGYPAK 625 / SYNCDRIVE SPORT3 85NM
SIZING GUIDE AND GEOMETRY
Sizing to be used as a reference only. Please check with a local authorized dealer to determine the correct size.
Available sizes may vary from country to country.
- S
- 5’4”
5’9”
- M
- 5’7” 6’0”
- L
- 5’10” 6’3”
- XL
- 6’2” 6’6”